24/7 supportRequest a demo

Engineering · Cloud to transmitter

From the cloud to your transmitter.

Your station plays in the cloud. Here's every way to get that audio to an AM, FM or HD Radio transmitter, what you need for each, and how to keep it on air when something breaks.

How the audio travels

The air chain.

  1. StudioAny browser, any room
  2. Cloud enginePlays the log, processes
  3. Transmitter streamIts own feed, your format
  4. Your siteDecoder, PC or STL
  5. TransmitterAM, FM, HD Radio

Every station gets a Transmitter stream of its own, separate from the stream listeners hear, so you can give it a higher quality and keep it out of directories. The air reaches the transmitter a few seconds after the studio. DJs hear the station from the studio itself, in step with what they do, so nobody has to talk over a delayed off-air feed.

Your options

Six ways to get to air.

Pick the one that fits each site. You can mix them across stations and use one as the backup for another.

01

A stream decoder at the transmitter site

Best for: Most stations with internet at the site

A small hardware audio decoder at the site pulls the station's Transmitter stream and plays it into the transmitter or processor. Most units also keep a backup audio file of their own and switch to it if the stream drops.

How to set it up

  1. 1In Station settings › Output streams, edit the Transmitter stream and pick its format and bitrate.
  2. 2Copy its address into the decoder at the site.
  3. 3Add the site's IP address under Streaming server settings › Always allow IP addresses, so it's never blocked or counted against listener limits.
  4. 4Connect the decoder's analog or AES output to your processor or transmitter.

You'll need: An internet connection at the site and an IP audio decoder that plays Icecast/HTTP streams.

02

A computer at the site

Best for: Low budgets, LPFM and spare-parts sites

Any small computer with a decent sound card or USB audio interface can play the Transmitter stream into the transmitter. Set the player to start by itself and to reconnect if the stream drops.

How to set it up

  1. 1Set up the Transmitter stream as above.
  2. 2Open its address in a stream player on the computer, set to start with the computer and retry on its own.
  3. 3Feed the sound card or interface output into the transmitter's audio input.

You'll need: A computer that stays on, a good audio output and an internet connection.

03

Through the STL you already have

Best for: Sites with no internet, or an STL you trust

Keep your microwave, licensed or IP studio-transmitter link. Put the decoder (or computer) at the studio instead, and feed its output into the STL as you feed the board today. Nothing changes at the transmitter site.

How to set it up

  1. 1Play the Transmitter stream on a decoder or computer at the studio.
  2. 2Feed its output into your STL transmitter or codec.
  3. 3Keep your STL's own backup audio and alarms as they are.

You'll need: Internet at the studio and your existing STL.

04

Push the stream to your site

Best for: Sites behind firewalls, or your own stream server

Instead of the site pulling the stream, the station sends it out: add a stream whose Where it goes is another Icecast or Shoutcast server, such as an encoder at the site or your own relay server.

How to set it up

  1. 1In Station settings › Output streams, choose Add stream.
  2. 2Set Where it goes to an Icecast or Shoutcast server and enter its address, port, mount and source login.
  3. 3Choose Apply to StationMonster Playout. The stream reconnects by itself if the far end restarts.

You'll need: A device or server at the other end that accepts an Icecast or Shoutcast source.

05

One feed for many sites

Best for: Groups, translators, boosters and simulcasts

Every site can pull the same Transmitter stream, or you can add extra streams in different formats for sites with slower connections. A relay to your own distribution server spreads one feed to as many sites as you run.

How to set it up

  1. 1Use the Transmitter stream for your main sites.
  2. 2Add extra streams, for example lower-bitrate AAC, for sites on cellular or slow links.
  3. 3Allow every site's IP address so none of them are ever blocked.

You'll need: A decoder or computer at each site.

06

HD Radio and RDS

Best for: Stations with digital channels or RDS encoders

Feed your HD Radio importer or exporter the same way as an analog transmitter, from a decoder's output. Song titles and artists for RDS and HD Radio come from the now-playing feed, which follows the station's own display rules.

How to set it up

  1. 1Play the Transmitter stream into the HD Radio gear's audio input.
  2. 2Point your RDS or HD Radio text encoder at the now-playing feed (see Feeds & embeds).
  3. 3Optional: send pictures and RadioText Plus tags from Visual radio.

You'll need: An encoder that can read text or JSON from a web address.

Formats

Which format to send.

FLAC

About 1 Mb/s

Best quality. Adds no second round of compression to the station's feed. Needs a steady connection.

MP3 320 kbps

320 kb/s

Plays on almost every decoder and holds up well through FM processing. A safe choice.

AAC 192–320 kbps

192–320 kb/s

Sounds very good on decoders that support it, with less data than MP3.

AAC or Opus, lower rates

48–128 kb/s

For sites on cellular or slow links, or as a backup stream.

Processing

Process in the cloud, or at the site.

In the cloud

Set the station's sound on the Processing page and every stream, the transmitter's included, gets it. One sound everywhere, adjusted from any browser, and no processor to buy.

At the site

Already have an FM processor you love? Turn cloud processing off for a clean feed and keep the processor between the decoder and the transmitter, where it handles pre-emphasis, stereo and composite as it does today.

Staying on air

When something breaks.

A backup playlist in the cloud

If the station's feed ever stops, its streams carry up to two hours of the station's own music instead of silence.

A second path

Add a second stream (If this stream stops lets one fall back to another) or a second decoder on a different internet connection.

Backup audio at the site

Most decoders can play a local file or playlist if the stream drops. Keep yours set up.

Alerts to your phone

Dead air, a stream that's down and a log that's running out send email, texts or Slack, Teams or Discord messages.

Transmitter remote control

Watch meters and status, get alarms and send commands to the site from the Transmitter page.

Every minute recorded

The air logger records what went out, so you can check any moment.

EAS today

Keep your EAS equipment in the chain.

Licensed stations still need certified EAS equipment. Put your EAS encoder/decoder between the decoder (or STL receiver) and the transmitter, just where it sits now, so it can break in with alerts. StationMonster keeps your EAS log and reminds you when a weekly or monthly test is due. Our built-in emergency alerts are for internet stations and don't replace EAS.

In development

One box at the transmitter.

We're building a StationMonster box for the transmitter site: plug it in and it brings the station from the cloud to air, with backups, remote control and cloud-based EAS built in, to replace the stack of decoders, remote controls and EAS boxes in the rack today.

It isn't available yet, and we don't have a date to share. Its EAS features will only be offered once the box is FCC certified. Until then, keep your current EAS equipment.

Tell me when it's ready

Plug in and go

Connect the box to power, the internet and your transmitter. It finds the station and starts playing.

Two ways in

Built to use two internet connections, such as wired and cellular, and switch between them by itself.

Backup audio inside

Keeps a copy of the station's own music so the transmitter never goes silent, even with no internet at all.

Remote control built in

Meters, status and commands for the transmitter, right on the Transmitter page, with no separate unit.

Cloud-based EAS

Designed to replace the standalone EAS encoder/decoder: alerts monitored in the cloud, aired through the box and logged for you.

Logs and tests kept for you

Weekly and monthly tests and every alert received or sent, kept with the station's compliance records.

What we're building it to do. Details may change before it ships.

Need help with your site?

Tell us how your transmitter site is wired and we'll help you pick the right way to get StationMonster to air.